Wall Mount Shower Glass Clamp- Beveled

• Gasket Specifications

For 3/8″ (10 mm) Glass: Use One Thick Gasket On Each Side For 1/2″ (12 mm) Glass: Use One Thin Gasket On Each Side

• Glass Instructions

   To prevent damage to the hinge finish during installation, do not use power tools when installing these hinges.

• Overview

• Care & Cleaning Guidelines

For best results, keep the following recommendations in mind when caring for your shower clamp hardware. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle, cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.

• Maintenance

Keeping your glass installations in pristine condition is vital, and that includes proper care for your glass clamps. To maintain their performance and aesthetic appeal ensure that you regularly clean the glass clamps by wiping them with a damp soft cloth to remove dust and debri . Refrain from using abrasive cleaners as they can damage t e finish of the clamp. Instead, stick to gentle cleaning solutions. Check tightness by periodically inspecting the clamp screws to ensure they fit snug.